Residential Utlities Information (RFI)
Drop a file here or click to upload Choose File
Maximum upload size: 67.11MB
UPLOAD AN IMAGE FILE HERE OF THE MAIN ELECTRICAL PANEL'S INTERIOR BREAKER SPACE AVAILABLE AND AMPERE RATING
Drop a file here or click to upload Choose File
Maximum upload size: 67.11MB
UPLOAD AN IMAGE FILE HERE OF THE GAS METER'S PLATE INFO OR THE LPG TANK'S PLATE INFO (SIZE)
First
Last
Project Address
City
State/Province
Zip/Postal
Country
PROVIDE THE PROJECT ADDRESS
PROVIDE US WITH A LIST OF YOUR "MUST HAVE" ELEMENTS OF DESIRE I.E., POOL, SPA, CABO SHELF, WATER FEATURE, FIRE PIT, ETC...
THIS IS AN IMPORTANT FACTOR TO BE AWARE OF, AS IT IS ONLY A COPPER WIRE CONDUCTOR WITH THE LABELING OF "WTHHN" INSCRIBED ON THE OUTER SHEATH THAT SHALL BE APPROVED PER THE NATIONAL ELECTRICAL CODE (NEC) 680.0. PLEASE SELECT COPPER HERE
INDICATE ON YOUR ROUGH SKETCH WHERE THE MAIN ELECTRICAL PANEL IS LOCATED AND WHERE YOU WISH THE POOL EQUIPMENT'S SUB-PANEL TO BE LOCATED. PROVIDE AN ESTIMATED DISTANCE (WE WILL VERIFY AFTER THE DIMENSIONAL SITE PLAN HAS BEEN COMPLETED). THE DISTANCE TOGETHER WITH THE AMPERE LOAD DEMAND WILL DETERMINE WHAT THE WIRE AND CONDUIT SIZE WILL NEED TO BE BUT, ITS GOOD TO START WITH A ROUGH IDEA.
THE VOLTAGE WILL MOST OFTEN BE 240v SINGLE PHASE AND THE AMPERE LOAD IS DETERMINED BY THE SELECTED OF THE EQUIPMENT AND EACH OF THE COMPONENT'S ENERGY DEMANDS. THE DISTANCE TOGETHER WITH THE AMPERE LOAD DEMAND WILL DETERMINE WHAT THE WIRE AND CONDUIT SIZE WILL NEED BE AND THIS ALL NEEDS TO FALL WITHIN THE "ALLOWABLE VOLTAGE LOSS", WHICH IS LESS THAN 3.0% WHEN UNDER FOLL LOAD. NO NEED TO FILL THIS IN JUST YET, WE'RE JUST MAKING YOU FAMILIAR WITH HOW THE PROCESS FOR DETERMINING THE CORRECT SIZES IS ACCOMPLISHED.
SOME PROJECTS WISH TO DISTRIBUTE SECONDARY "YARD POWER" FOR OTHER USAGE I.E.; BBQ'S, RECEPTACLES, FANS, LIGHTS, ETC.. THIS POWER USAGE SHALL ALSO NEED TO BE SIZED ACCORDINGLY. IF KNOWN YOU MAY PROVIDE US WITH A PRELIMINARY MEASUREMENT AND IDENTIFY THE PURPOSES.
INDICATE WHAT TYPE OF GAS IS AVAILABLE, IF GAS IS TO BE DISTRIBUTED ON SITE.
PROVIDE A PRELIMINARY DISTANCE FROM THE GAS METER OR TANK TO THE POOL EQUIPMENT PAD, IF KNOWN. THE FINAL VALUE WILL BE DETERMINED FROM THE DIMENSIONS ON THE SITE PLAN.
PROVIDE A PRELIMINARY DISTANCE FROM THE GAS METER OR TANK TO THE OTHER USAGE IF KNOWN. ALSO IF YOU'VE SELECTED ANY SPECIFIC EQUIPMENT, PLEASE PROVIDE THE BTU RATING FOR EACH PIECE. THE FINAL VALUES WILL BE DETERMINED FROM THE DIMENSIONS ON THE SITE PLAN.
IN THE CHANCE THAT YOU HAVE OTHER CONSIDERATIONS THAT WE HAVE FAILED TO IDENTIFY, PLEASE PROVIDE US WITH A DESCRIPTION FOR WHAT THESE MAY BE.
Sending
Aquatic Mechanical Engineering  (800) 766-5259