Residential Utlities Information (RFI)
INDICATE WHAT TYPE OF GAS IS AVAILABLE, IF GAS IS TO BE DISTRIBUTED ON SITE.
Drop a file here or click to upload Choose File
Maximum upload size: 104.86MB
UPLOAD AN IMAGE FILE (jpg.file) HERE OF THE SITE PLAN THAT'S BEEN MARKED-UP SHOWING THE LOCATION OF THE GAS METER. INDICATE THE INTENDED METER / TANK SIZE (IF KNOWN) AND THE TYPE OF GAS (NATURAL / LPG)
THIS IS AN IMPORTANT FACTOR TO BE AWARE OF, AS IT IS ONLY A COPPER WIRE CONDUCTOR WITH THE LABELING OF "WTHHN" INSCRIBED ON THE OUTER SHEATH THAT SHALL BE APPROVED PER THE NATIONAL ELECTRICAL CODE (NEC) 680.0. PLEASE SELECT COPPER HERE
Drop a file here or click to upload Choose File
Maximum upload size: 104.86MB
UPLOAD AN IMAGE FILE (jpg.file) HERE OF THE SITE PLAN THAT'S BEEN MARKED-UP SHOWING THE LOCATION OF THE ELECTRIC METER. INDICATE THE INTENDED METER SIZE (AMPS RATING IF KNOWN) AND THE VOLTAGE (120v/240v) / POWER PHASE TYPE (SINGLE / 3-PHASE).
INDICATE THE TYPE OF WATER SUPPLY THAT WILL BE AVAILABLE.
Drop a file here or click to upload Choose File
Maximum upload size: 104.86MB
UPLOAD AN IMAGE FILE (jpg.file) HERE OF THE SITE PLAN THAT'S BEEN MARKED-UP SHOWING THE LOCATION OF THE WATER METER. INDICATE THE INTENDED METER SIZE (IF KNOWN) AND THE TYPE OF WATER SOURCE (WELL / CITY / ETC.)
INDICATE THE TYPE OF WATER SUPPLY IS AVAILABLE.
Drop a file here or click to upload Choose File
Maximum upload size: 104.86MB
UPLOAD AN IMAGE FILE (jpg.file) HERE OF THE SITE PLAN THAT'S BEEN MARKED-UP SHOWING THE LOCATION OF THE LEACH FIELD, SEPTIC TANKS AND OR SEWER CONNECTION LOCATION AND SIZE.
First
Last
Project Address
City
State/Province
Zip/Postal
Country
PROVIDE THE PROJECT ADDRESS
PROVIDE US WITH A LIST OF YOUR "MUST HAVE" ELEMENTS OF DESIRE I.E., POOL, SPA, CABO SHELF, WATER FEATURE, FIRE PIT, ETC...
Drop a file here or click to upload Choose File
Maximum upload size: 104.86MB
INDICATE ON YOUR ROUGH SKETCH WHERE THE MAIN ELECTRICAL PANEL IS LOCATED AND WHERE YOU WISH THE POOL EQUIPMENT'S SUB-PANEL TO BE LOCATED. PROVIDE AN ESTIMATED DISTANCE (WE WILL VERIFY AFTER THE DIMENSIONAL SITE PLAN HAS BEEN COMPLETED). THE DISTANCE TOGETHER WITH THE AMPERE LOAD DEMAND WILL DETERMINE WHAT THE WIRE AND CONDUIT SIZE WILL NEED TO BE BUT, ITS GOOD TO START WITH A ROUGH IDEA.
IF YOU HAVE EXISTING POWER THEN INDICATE ON YOUR ROUGH SKETCH WHERE THE MAIN ELECTRICAL PANEL IS LOCATED AND WHERE YOU WISH THE POOL EQUIPMENT'S SUB-PANEL TO BE LOCATED. PROVIDE AN ESTIMATED DISTANCE (WE WILL VERIFY AFTER THE DIMENSIONAL SITE PLAN HAS BEEN COMPLETED). THE DISTANCE TOGETHER WITH THE AMPERE LOAD DEMAND WILL DETERMINE WHAT THE WIRE AND CONDUIT SIZE WILL NEED TO BE BUT, ITS GOOD TO START WITH A ROUGH IDEA.
THE VOLTAGE WILL MOST OFTEN BE 240v SINGLE PHASE AND THE AMPERE LOAD IS DETERMINED BY THE SELECTED OF THE EQUIPMENT AND EACH OF THE COMPONENT'S ENERGY DEMANDS. THE DISTANCE TOGETHER WITH THE AMPERE LOAD DEMAND WILL DETERMINE WHAT THE WIRE AND CONDUIT SIZE WILL NEED BE AND THIS ALL NEEDS TO FALL WITHIN THE "ALLOWABLE VOLTAGE LOSS", WHICH IS LESS THAN 3.0% WHEN UNDER FOLL LOAD. NO NEED TO FILL THIS IN JUST YET, WE'RE JUST MAKING YOU FAMILIAR WITH HOW THE PROCESS FOR DETERMINING THE CORRECT SIZES IS ACCOMPLISHED.
PROVIDE A PRELIMINARY DISTANCE FROM THE GAS METER OR TANK TO THE OTHER USAGE IF KNOWN. ALSO IF YOU'VE SELECTED ANY SPECIFIC EQUIPMENT, PLEASE PROVIDE THE BTU RATING FOR EACH PIECE. THE FINAL VALUES WILL BE DETERMINED FROM THE DIMENSIONS ON THE SITE PLAN.
IN THE CHANCE THAT YOU HAVE OTHER CONSIDERATIONS THAT WE HAVE FAILED TO IDENTIFY, PLEASE PROVIDE US WITH A DESCRIPTION FOR WHAT THESE MAY BE.
Sending
Aquatic Mechanical Engineering  (800) 766-5259