Commercial / Public Swimming Pools

MULTI-FUNCTIONAL FULL EQUIPMENT ROOM CONTROL DOSER

Acu-Trol AK600

The Acu-Trol AK600 controller is the most advanced multiple pool controller available, providing the ultimate in equipment room automation. Up to sixteen output relay combinations, configurable for up to six types of control. The Acu-Trol AK600 controller can be customized for any facility, with voltage-configurable control relays and bi-directional control, database information options accessible via direct link, dial-up, wireless modem and ethernet connectivity. With control of chemicals, pumps, filters, heaters, air handlers, chloramine reduction systems and the ability to interface with building management systems for up to 3 bodies of water, the Acu-Trol AK600 controller completes any aquatic facility.

PENTAIR ACU-TROL AK600

STANDARD FEATURES

• AcuCom™ Software

• Multiple pool control for 1, 2 or 3 pool configurations

• Programmable pH, ORP and temperature set points

• Programmable proportional feed for precise chemical feed

• Programmable acid, CO2 or base feed for pH control

• Auto backwash filters for up to two bodies of water

• Flow cell with built-in flow switch, shut-off valves, inlet strainer and sampling port

• 16 relays with three (3) voltage configurations

OPTIONS

• AcuManage™ II Software Notification alarms and sensor readings AcuManage II available via AcuPort™ Connectivity communication only

• AcuPort Connectivity System Ethernet, WiFi or RS422/485

• Input/Output Modules AK245™ Quad 4-20mA/O-5VDC Output

• AKColor™ Sensor System The AKColor Colorimetric system measures PPM of free chlorine with the DPD (N, N-DIETHYL-PPHENYLENEDIAMINE) test

• Influent/Effluent Pressure Sensor Pressure information for control of an automatic backwash

• Optical Level Sensor Measurement and automatic control of water level

• Digital Flow Sensor Displays flow rate in gallons per minute

• Conductivity Sensor Measurement of water TDS

• Premounting Mounted on easy to install polypropylene pre-drilled board

FEATURES

• Sensors The Acu-Trol AK600 controller sensors are capable of measuring ORP, pH, free chlorine, conductivity, temperature, flow rate and pressure

• Flow Cell The AK1200™ Flow Cell offers inlet and outlet valves for sensor protection and
third outlet for ease of water sampling

• Relays Customized relay control for up to 96 combinations

• Colorimetric Compatible Compatible with the AKColor Colorimetric PPM sensing measurement
system for free and total chlorine

• Readings The Acu-Trol AK600 controller displays the Puckorius, Langelier or Ryzner indexes and differential influent and effluent pressure

• Alarms Alarms are activated by sensor measurements and will communicate at two hour increments until alarm is cleared

• Communication The Acu-Trol AK600 controller communicates using the AcuCom™ and AcuManage II software. Software packages provide wireless communication with modem modules

• Security Password protected allows limited access 3 levels with 7 unique passwords

PENTAIR ACU-TROL AK600

PENTAIR ACU-TROL AK600

PENTAIR ACU-TROL AK600

PENTAIR ACU-TROL AK600

Click HERE for AK-600 Brochure pdf.file

If you have any questions, please contact us @ 800-766-5259

Aquatic Mechanical Engineering  (800) 766-5259