INSTRUCTIONS:

Click on the image below to open the enlarge feature, after opening click again to 2 x enlarge and then scroll with your mouse’s thumb wheel while holding your “Ctrl” key in order to magnify the image larger or smaller, use your browser’s back arrow to return to this webpage.

Final Layout

Final Dimensional Layout Plan

As you have reviewed the progressive steps in getting us to this plan layout this is the current understanding for the true and accurate planned intentions.

From this plan the additional CAD layers will be incorporated into this drawing as the base layer for the overall design so, we’d like it if you can take one last look at everything regarding this desire and confirm that it is correct.


Pool & Spa Bottom Contours

Pool & Spa Bottom Contours

Missing Dimensions

Also…please indicate where the gates are to be located and if the 6′-0″ Fencing Off-Set from the pool’s edge is correct. You may make notation as to any corrections that are necessary at this final draft but, future changes will incur considerations for additional time / fees.

The Pool Safety Fencing and gates will need to be 5′-0″ in height and according to the Swimming Pool Safety Barrier Regulations. In order to review click HERE.

If you can also provide me with “dimensional references” on this latest Sheet P-1 regarding your intentions for the concrete decking that is supposed to go around the swimming pool this would be most helpful.

Custom Raised Bond Beam Sections

Proposed Raised Bond Beam Concept #1

This Section example would be placed at the two locations where the design calls for Sheer Descent Waterfalls. It represents 2′-0″ wide x 3′-0″ high and 26′-3″ in length, that positions a Sheer Descent Waterfall having a radius 12″ cut extended lip that centered @ a 4′-0″ width.

The pool’s 6″ waterline tile and RBB’s topical products would need to be determined by you and exhibited on the Plan Detail that is provided, Click HERE to view.

Aquatic Mechanical Engineering  (800) 766-5259