Unleash You Dream Oasis: Expert Swimming Pool Design and Planning That Can WOW!

 

Request for Property Plot Planning Document (PPP)

 

A Property Plot Plan (PPP) is a critical document for you to provide us in order to better facilitate your swimming pool design. It should be an officially recognized “wet stamped” survey that’s been produced by a licensed / certified Engineer.

 

Click on image below to enlarge view, use your Browser’s back-arrow key to return to this page

 

Property Plot Plan Example<

 

If for some reason you do not possess an official PPP document then please give us a call 800-766-5259 prior to engaging the form below.

 

How to Request a Design Proposal (RFP)…

Please complete the swimming pool design form below by filling in all the required fields (see red colored asterisk) and then click upon the appropriate titled boxes that shall identify the desired AQ-Layout Sheets and or the AQ-Detail Sheets that are being requested for your swimming pool design’s considerations.

 

These represent the specific design “SHEETS” that are to be made inclusive in your Design Work Scope and by completing the form, it will help us to better partner in establishing the framework for responding with our Design Proposal / Quotation.

 

Additionally, you may also “drag and drop” any pdf. or jpg.files that can aid our better understanding for your design desires.

 

If you have any difficulty filling in your answers on the form or have questions, please don’t hesitate to give us a call while you’re are online, and we’ll assist you. (800) 766-5259

 

The official survey should be “red-line” marked up indicate the following information;

  • 1.) Property Address, Legal Owner

  • 2.) Site Plan w/ property line dimensions (all sides)
  • 3.) Topography (FF, FG, FC, etc..spot elevations)
  • 4.) APN # (Assessor’s Parcel Number)
  • 5.) Swimming Pool Shell Set-Back Restriction
  • 6.) Swimming Pool Equipment Set-Back Restriction
  • 7.) Public Utility Easements (P.U.E.) Set-Backs
  • 8.) Electrical Power Supply Source (Overhead / Underground)
  • 9.) Electrical Meter Location (Size of Amperes)
  • 10.) Electrical Sub-Panel Location (Pool Equipment)
  • 11.) Gas Supply Source Type (Natural / LPG)
  • 12.) Water Supply Type (City / Well)
  • 13.) Water Point of Connection Location (WPOC)
  • 14.) Septic or Sewer System (If Septic,the leach field location will need to be indicated)
  • 15.) Swimming Pool Length
  • 15.) Swimming Pool Width
  • 17.) Swimming Pool Shallow Depth
  • 18.) Swimming Pool Mid Depth
  • 19.) Swimming Pool Deep End Depth
  • 20.) Swimming Pool Features (Cabo Shelf, Benches, Steps)
  • 21.) Swimming Pool Water Features / Special Effects
  • 22.) Swimming Pool Deck Area
  • 23.) Swimming Pool Fencing / Gates

 

800-766-5259 CALL US TODAY!

 

Preliminary Request for Information (PRFI)

Please provide us with your personal information and answers to as many of the questions that we are asking about. The information that we are seeking is most relevant for helping us to understand what will need to be described on plan and prepare for the PLAN CHECK REVIEW by Officials at the local Building Dept. We are seeking answers to your property and project's layout specifics that are most often in need of explanation in order to submit plans.
Upon confirmation of the completed FORM, we will provide you with our response according to the urgency of your time-frame being requested either by telephone or email.

ENTER TODAY'S DATE
ENTER CURRENT TIME OF FORM SUBMISSION
ENTER THE BEST TIME TO SCHEDULE A TELEPHONE CALL TO DISCUSS YOUR PROJECT. ALLOW AT LEAST TWENTY-FOUR (24) HOURS AFTER SUBMISSION OF THIS FORM TO ELAPSE IN INDICATING A CALL-BACK TIME AND DATE.
ENTER THE BEST DATE AND TIME TO REACH YOU.
PROVIDE THE BEST TELEPHONE NUMBER TO REACH YOU AT THE TIME INDICATED.
FIRST NAME
LAST NAME
APPROACH TO THE CONSTRUCTION PROCESS
INDICATE THE APPROACH THAT IS INTENDED TO BE UTILIZED FOR THE CONSTRUCTION, EITHER A "BUILDER" OR "OWNER / BUILDER" PROJECT.
PROVIDE THE COMPANY NAME OF THE PROFESSIONAL BUILDER AND THE NAME OF THE RESPONSIBLE PARTY FOR PLANNING.
PROVIDE THE LICENSE NUMBER AND TRADE CLASSIFICATION OF THE PROFESSIONAL BUILDER WHO WILL BE RESPONSIBLE FOR PLANNING AND CONSTRUCTION.
PROVIDE THE BUSINESS ADDREWSS OF THE PROFESSIONAL BUILDER RESPONSIBLE FOR PLANNING.
PROVIDE THE TELEPHONE NUMBER OF THE PROFESSIONAL BUILDER RESPONSIBLE FOR PLANNING.
PROVIDE THE EMAIL ADDRESS OF THE PROFESSIONAL BUILDER RESPONSIBLE FOR PLANNING.

Maximum file size: 516MB

UPLOAD A COPY OF YOUR PROPERTY'S SURVEY SHOWING THE HOME'S 1ST FLOOR FOOTPRINT, ALL PROPERTY LINE DIMENSIONS, BUILDING SET-BACKS, PUBLIC UTILITY EASEMENTS, P.U.E.'S, TOPOGRAPHY, DOORS, WINDOWS LOCATIONS, SEPTIC LEACH FIELD, ETC.. NOTE: IF THE PLOT PLAN DOES NOT INDICATE ELEVATIONS (TOPOGRAPHY) THEN MARKUP AND PROVIDE SPOT ELEVATIONS FOR THE HOME'S FINISH FLOOR (FF) AND THE PROPOSED POOL'S FINISHED DECKING. USE +/- 0" AS A STARTING ELEVATION FOR THE HOME'S FINISH FLOOR AND THEN INDICATE A HIGHER OR LOWER ELEVATION (+1", +2" OR -1", -2", etc.) FROM THERE FOR THE POOL FINISH DECKING.
PROVIDE THE PROPERTY'S ASSESSORS PARCEL NUMBER
INDICATED THE SWIMMING POOL'S BUILDING FRONT PROPERTY LINE SET-BACK RESTRICTION
INDICATED THE SWIMMING POOL'S BUILDING REAR PROPERTY LINE SET-BACK RESTRICTION
INDICATED THE SWIMMING POOL'S BUILDING RIGHT SIDE PROPERTY LINE SET-BACK RESTRICTION. NOTE: FROM THE RIGHT SIDE WHEN FACING THE HOUSE FROM THE STREET
INDICATED THE SWIMMING POOL'S BUILDING LEFT SIDE PROPERTY LINE SET-BACK RESTRICTION. NOTE: FROM THE LEFT SIDE WHEN FACING THE HOUSE FROM THE STREET
7.) SHELL MEASUREMENT STARTING POINT
INDICATE THE STARTING POINT FOR THE MEASUREMENT OF THE POOL SHELL SET-BACK RESTRICTION
INDICATED THE SWIMMING POOL'S EQUIPMENT SET-BACK RESTRICTION FROM PROPERTY LINE
9.) PUBLIC UTILITY EASEMENTS
INDICATE WHETHER OR NOT THERE ARE ANY PUBLIC UTILITY EASEMENTS (P.U.E.)
10.) PUE's PROPERTY LINE LOCATION

Maximum file size: 516MB

MARKUP THE PLOT PLAN INDICATING THE LOCATIONS OF THE GAS METER (OR GAS TANK), ELECTRIC METER, WATER CONNECTION, SEWER OR SEPTIC SYSTEM (INCLUDING THE LOCATION OF THE TANK & LEACH FIELD).
12.) TYPE OF GAS SUPPLY
INDICATE THE TYPE OF GAS FEEDING THE PROPERTY
13.) GAS TANK (IF LPG)
INDICATE THE LPG TANK SIZE FEEDING THE POOL EQUIPMENT
14.) TYPE OF MAIN POWER SUPPLY
INDICATE THE LPG TANK SIZE
15.) ELECTRIC METER AMPERE SIZE / CAPACITY
INDICATE THE LPG TANK SIZE
16.) ELECTRIC POWER PHASE / VOLTAGE
INDICATE THE TYPE OF SEWER SERVING THE PROPERTY
17.) TYPE OF SANITARY SEWER
INDICATE THE TYPE OF SEWER SERVING THE PROPERTY
18.) TYPE OF WATER SERVICE
INDICATE THE TYPE OF WATER SERVING THE PROPERTY

Maximum file size: 516MB

MARK UP THE PLOT PLAN AND INDICATE THE INTENDED LOCATION FOR THE SWIMMING POOL EQUIPMENT PAD AND SUB-PANEL
INDICATE THE POOL LENGTH (INSIDE DIMENSION)
INDICATE THE POOL WIDTH (INSIDE DIMENSION)
INDICATE THE POOL DEPTH (DEEP END DIMENSION)
INDICATE THE POOL DEPTH (MID POOL DIMENSION)
INDICATE THE POOL DEPTH (SHALLOW END DIMENSION)
25.) CABO SHELF / CARRIBBEAN SHELF AREA
INDICATE WHETHER OR NOT THERE IS GOING TO BE A CABO SHELF / CARIBBEAN SHELF / TANNING LOUNGER AREA.
26.) TANNING LOUNGING AREA DEPTH
INDICATE THE DESIRED WATER DEPTH OF THE TANNING LOUNGER AREA.
27.) SWIM-OUT BENCH (POOL)
INDICATE WHETHER OR NOT THERE IS GOING TO BE SWIM-OUT BENCHES LOCATED IN THE POOL. IF SO, THESE ARE GENERALLY SET AT -18" BELOW THE WATER LEVEL.
28.) SWIM-OUT BENCH LENGTH
INDICATE THE DESIRED LENGTH OF THE SWIM-OUT BENCH.
29.) BENCH LOCATIONS
INDICATE THE DESIRED LOCATION OF THE BENCH (S) IN THE POOL.
30.) TOTAL NUMBER OF SWIM-OUT BENCHES
INDICATE THE TOTAL NUMBER OF SEPARATE BENCHES IN THE POOL
31.) SPECIAL WATER FEATURES
INDICATE THE DESIRE TO HAVE ANY SPECIAL WATER FEATURES CONSIDERED.
32.) TYPE OF POOL DECKING
INDICATE THE TYPE OF POOL DECK THAT IS BEING CONSIDERED.

Maximum file size: 516MB

THE BUILDING DEPT.S REGULATION REQUIRES THAT THE PLAN SHOW WHERE THE SAFETY BARRIER WILL BE LOCATED TOGETHER WITH THE GATES. THE GATES MUST SWING OUTWARD AND BE SELF LATCHING. ADDITIONALLY, DOORS AND WINDOWS ON THE HOME MUST ALSO BE SHOWN ON PLAN AND IF THEY HAVE "GLASS" AND ARE WITHIN 5'-0" OF THE POOL THE "GLASS MUST BE MADE OF TEMPERED GLASS.
34.) PATIO SPECIAL FEATURE
INDICATE IF ANY OF THESE FEATURES ARE TO BE CONSIDERED AS PART OF AN OVERALL MASTER PLAN APPROACH TO THE DESIGN.
35.) IN-GROUND SPA (SEATING POSITION)
THE SEATING POSITIONS INDICATE THE PLACEMENT FOR THE SPA JETS. BY INDICATING THE NUMBER OF SEATING POSITIONS IT ALSO HELPS TO DETERMINE THE OVERALL INSIDE DIMENSIONS FOR THE SPA.
36.) JETS PER SEAT
INDICATE THE NUMBER OF JETS TO BE LOCATED PER SEATING POSITION. TYPICALLY THERE ARE THREE (3) MANIFOLDED "BACK JETS" THAT CAN HAVE TWO (2) ON THE UPPER BACK AND ONE (1) ON THE LOWER OR THIS CONFIGURATION CAN BE INVERTED TO ALLOW FOR TWO (2) ON THE UPPER AND ONE (1) ON THE LOWER BACK. THE OTHER JET OPTIONS ARE 'CALF JET" AND "FOOT JET" PLACEMENTS.

Maximum file size: 516MB

UPLOAD ANY IMAGES THAT HELP TO DESCRIBE THE SWIMMING POOL INTENTIONS

Maximum file size: 516MB

UPLOAD ANY IMAGES THAT HELP TO DESCRIBE THE SWIMMING POOL INTENTIONS

Maximum file size: 516MB

UPLOAD ANY IMAGES THAT HELP TO DESCRIBE THE SWIMMING POOL INTENTIONS
PROVIDE A BULLET POINT DESCRIPTION OF THE POOL THAT CAN OFFER US THE HIGH-LIGHTS OF YOUR FURTHER DESIRES AND OR ANY COMMENTS THAT MAY HELP TO DESCRIBE THE OVERALL CONCEPT BEING CONSIDERED.



 

Go To Top »
Aquatic Mechanical Engineering (800) 766-5259