INSTRUCTIONS:

Click on the image below to open and enlarge, after opening click again to 2 x enlarge and then scroll with your mouse’s thumb wheel while holding your “Ctrl” key in order to magnify the image larger or smaller, use your browser’s back arrow to return to this webpage.

Preliminary Site Plan

Click on the image below to open larger view …

PRELIMINARY SPOOL LAYOUT

Confirmation of Pool Equipment Location

I requested confirmation about the desired location for the pool equipment and had not heard back, thus I have placed it under the deck. If this is in conflict with other elements, please advise as to where space 8′-0″-W x 6′-0″-L x 5′-0″-H will be available.

It was discussed that it will be placed under the decking?

Proposed Bond Beam Elevations

In reviewing the site plan, there is a planter area and wall that are exhibited adjacent to the Spool.

The wall’s upper elevation is 105.25′ and the upper deck elevation is 104.05’making the wall 1′-2-1/2″ above the deck. The wall also has a 3′-6″ railing (108.75′).

In this Concept #1 Spool Layout, I have accommodated the upper deck elevation by embracing the back of the Spool with a Raised Bond Beam (See Color Purple TOBB = 103.66′).

In this concept the Spool’s Raised Bond Beam would create the planter’s pool side wall stepping up at the 4-steps and descending at the lower basin’s (TOBB = 99.50′).

Spool Elevations

Please review the proposed elevations that are indicated. In requesting any corrections / modification refer to these a A thru I as listed on the right side of the Detail below./h4>

Click on the image below to open larger view …

PRELIMINARY ELEVATIONS

Seating & Jet Conformity/strong>

The preliminary spool / spa seating together with the jet quantities, jet positions, jet nozzle types, bottom and bench depths. Upon confirmation of these considerations a spa jet diagram will indicated where these are to be located and plumbed in.

Click HERE to view jet selections sample

The intended lighting has been exhibited having (3) three in the Spool and (3) three in the lower basin.

Click HERE to view Lighting Sample

Aquatic Mechanical Engineering  (800) 766-5259