INSTRUCTIONS:

Click on the image below to open the enlarge feature, after opening click again to 2 x enlarge and then scroll with your mouse’s thumb wheel while holding your “Ctrl” key in order to magnify the image larger or smaller, use your browser’s back arrow to return to this webpage.

Concept #2

This pool is 32′-0″ x 16′-0″ I.D. shown on the drawing. The pool is sized at 512-SF and 96-PF, as drawn. The bottom depth ranges from 3’6″ in the shallow to 6′-0″ in the deep end.

  • Click HERE to view example of Pool Bottom Contour

There is a -18″ Cabo Shelf abutting the shallow end, together with entry steps and two -18″ Swim-Out Benches adjacent to the deep end Fire Pit.

  • Click HERE to view Custom Benches and Steps

The pool’s water volume is approximently 16,750 gallons, thus requiring a pumping flow rate of 46.50 gpm in order to accomplish Title 24’s energy efficiency guidelines.

  • Click HERE to view pump curve performance

Fire / Water Feature

There are several possibilities regarding the conformity and function of the Fie Pit, including the possibility of combination Fire / Water Feature effects.

  • Click HERE to view a sample Fire Water Feature

Sheer Descent Waterfall

There is a 3′-0″ wide Sheer Descent Waterfall exhibited on plan, which will be placed in the center of the +24″ Raised Bond Beam section.

  • Click HERE to view a sample Sheer Descent Waterfall

Construction Details

The flat-work area has not been determined as of yet but, it will involve 96-LF of pool edge.

The further development of specifications for pouring, placing and finishing a possible concrete “Rat Slab” for the application of topical “Travertine Tile” flat-work and cantilever style edge can establish the criteria for how to accomplish a 1st Class standard. These directions can involve;

Pool Equipment Pad Location

The pool equipment Set-Backs are 5′-0″ as is typical…thus we will need to discuss the placed of the equipment in order to be compliant with clearances.

Raised Bond Beam Sections…

There are (2) two Raised Bond Beam sections (+24″ and +18″). We are assuming that the Sheer Descent Waterfall is to be raised in incremental two steps (+12″ & +24″), together with the Fire Pit to be elevated to +18″.

  • Click HERE to view an example of Raised Bond Beam

Conceptual Imagery…

Click on the image below to view a Conceptual Image of your new pool from this vantage point…

Swimming Pool Concept After Example #1

Aquatic Mechanical Engineering  (800) 766-5259